inFace Sonic Facial Cleansing Brush English Manual

inFace Sonic Facial Cleansing Brush - English User Manual

The inFace MS2000 Sonic Facial Cleansing Brush gently exfoliates dead skin cells, unclogs pores and removes up to 99.5% of environment residue, dirt and oil.

Shop at Gearbest Shop at AliExpress
  1. Press and hold the main button for 1.5 seconds to turn on the device. The device will automatically shut down in 90 seconds
  2. Once the device is turned on, it will automatically be in low intensity mode. Press the button again to toggle between the 3 different intensity modes.
  3. To turn off the device, press and hold the main button for 1.5 seconds.

  1. Lather your face with water and apply your favourite face cleanser thoroughly.
  2. Wet the inFace Sonic Facial Cleansing Brush device and turn it on.
  3. Using circular motions, gently glide the inFace Sonic Facial Cleansing Brush over your face for 90 seconds until the device automatically shuts down.
  4. Rinse and pat your face with a dry towel.

  1. Run water through the device to clean it.
  2. Place the device on the included base and place in a well-ventilated area to dry.
Note: do not use alcohol to clean the device.

  1. When the device's battery is low, the white LED above the button will continue to flash.
  2. Connect the device to the USB charger to charge.
  3. When charging, the white LED will continue to pulse. When charge is full, the LED will always be on. The device cannot be used while it is charging.

Model: MS-2000
Dimensions: 85mm x 53mm x 30.4mm
Battery: 400mAh
Charging type: USB DC 5V
Charging current: 200mA
Charging time: ~2.5 hours
Uses per charge: ~240 minutes of continuous use
Operating temperature: -10°C - 40°C
Material: FDA Food Grade Silicone